IMPREZA U.S.A. (E)
10-54
3. Remove the bulb from the socket by pushing it in and turning
counterclockwise. Install a new bulb.
4. Reinstall the lens to the front turn signal light assembly and tighten
the mounting screws.
J Side turn signal light
OM-H0246
1. Pull the left side of the turn signal light assembly while moving it for-
ward in relation to the vehicle.
2. Remove the bulb holder from the side turn signal light assembly by
turning it counterclockwise.
3. Pull the bulb out of the socket. Install a new bulb.
4. Set the bulb holder into the side turn signal light assembly and turn it
clockwise until it locks.
5. Reinstall the side turn signal light assembly on the side of the front
fender.
To Next Page
Loading...
