IMPREZA U.S.A. (E)
2-22
Infants and small children should always be placed in an infant or child
restraint system in the rear seat while riding in the vehicle. You should
use an infant or child restraint system that meets Federal Motor Vehicle
Safety Standards or Canada Motor Vehicle Safety Standards, is compat-
ible with your vehicle and is appropriate for the child’s age and size. All
child restraint systems are designed to be secured in the vehicle seats
by lap belts or the lap portion of a lap/shoulder belt.
Children could be endangered in an accident if their child restraints are
not properly secured in the vehicle. When installing the child restraint
system, carefully follow the manufacturer’s instructions.
According to accident statistics, children are safer when properly re-
strained in the rear seating positions than in the front seating positions.
These statistics also indicate that the safest position for a child restraint
system is the center of the rear seat.
All U.S. states and Canadian provinces require that infants and small
children be restrained in an approved child restraint system at all times
while the vehicle is moving.
B Installing child restraint systems in the 2-point type seat belt
position (Rear center seating position)
HS2002BA
1. Set the child restraint system in the center seating position.
2. Run the 2-point type seat belt through or around the child restraint
system following the instructions provided by its manufacturer.
3. Insert the tongue plate into the buckle.
To Next Page
Loading...
