FORESTER (72F) NA (E) A8040B
4
Climate control
4-7
– CONTINUED –
B Heating and defrosting
HS0074
To direct warm air toward the floor and the windshield:
1. Set the air inlet selection lever to the “
” position.
2. Set the air flow control dial to the “
” position.
3. Set the temperature control dial to the most comfortable level.
4. Set the fan speed control lever to the desired speed.
NOTE
Warm air also comes out from the right and left air outlets. To
stop warm air flow from these outlets, turn the corresponding
thumb-wheel to the “
” position.
B Heating
HS0076
To direct warm air toward the floor:
To Next Page
Loading...
