FORESTER (72F) NA (E) A8040B
5
Audio
5-11
– CONTINUED –
B To start playback
n When CD is not in the CD player
Hold a disc with a finger in the center hole while gripping the edge of
the disc, then insert it in to the slot (with the label side up) on the CD
player and the player will automatically pull the disc into position.
After insertion, the CD player mode indicator “CD” will come on and
playback will start.
n When CD is in the CD player
Press the “CD” button
U. The “CD” indicator will come on, and the
track number will appear on the display and the CD player will start
playback.
NOTE
D If the “CD” button is pressed during a radio broadcast, the
disc will interrupt the broadcast.
D After playback on the last song finishes, the player will auto-
matically return to track 1 (the first song on the disc).
B To select a song from its beginning
Briefly press the “""❚” button
P to skip to the beginning of the next
track and briefly press the “❚AA ” button to skip to the beginning of
the current track.
B Fast-forwarding and fast-reverse
Press the “""❚” button
P continuously for more than a half second
to fast-forward the disc.
Press the “❚AA” button continuously for more than a half second to
fast reverse the disc.
Release the button to stop fast forwarding or fast reverse.
B Repeat
Press the “RPT” button
O while a song is playing to play the song
repeatedly. The “RPT” indicator will come on and the song will be
played continuously. To cancel the repeat mode, press the button
again. Then the “RPT” indicator goes out, and normal playback mode
is restored.
To Next Page
Loading...
