FORESTER (72F) NA (E) A8040B
2-10
2. Open the driver’s door and sit in the driver’s seat.
3. Close the driver’s door.
HB2032BB
4. Place the ignition key into the ignition switch and cycle the switch
from LOCK to ON ten times within 15 seconds. Be sure to stop at the
LOCK position and leave the key in the ignition. The horn will sound
once to indicate that you are in the transmitter programming mode.
NOTE
You must finish the next step (opening the driver’s door) within
45 seconds of starting this procedures.
To program the transmitters:
HB1000DB
1
2
HB1005BB
3 Press any button.
1. Open the driver’s door.
2. Close the driver’s door.
To Next Page
Loading...
