IMPREZA U.S.A. (E) A1820BE–A
10-44
B Fuse box (behind the coin tray)
1. Turn the ignition switch to the “LOCK” position and turn off all elec-
trical accessories.
HS0202
2. Open the coin tray and pull it horizontally to remove it.
3. Determine which fuse may be blown. The back side of the coin
tray and the “Fuse and circuits” section in chapter 11 in this manual
show the circuit for each fuse.
HS0208HS0207
Fuse puller
Fuse puller
Spare fuses
4. Pull out the fuse with the fuse puller. The fuse puller is stored in the
main fuse box cover in the engine compartment.
5. Inspect the fuse. If it has blown, replace it with a spare fuse of the
same rating. The spare fuses are stored in the main fuse box cover in
the engine compartment.
6. If the same fuse blows again, this indicates that its system has a
To Next Page
Loading...
