IMPREZA U.S.A. (E) A1820BE–A
10
Maintenance and service
10-43
– CONTINUED –
Fuses
HG0127HS0202
The fuses are designed to melt during an overload to prevent damage to
the wiring harness and electrical equipment. The fuses are located in
two fuse boxes.
If any lights, accessories or other electrical controls do not operate, in-
spect the corresponding fuse. If a fuse has blown, replace it.
HS0204
Good Blown
CAUTION
Never replace a fuse with one having a higher rating or with mate-
rial other than a fuse because serious damage or a fire could re-
sult.
To Next Page
Loading...
