3-24
Instruments and controls
shield wiper blades” section (chapter 11) for re-
placement instructions.
! Windshield wiper and washer switches
! Windshield wipers
1) MIST
To turn the wipers on, push the wiper control lever
down.
: Intermittent
LO: Low speed
HI: High speed
To turn the wipers off, return the lever to the “OFF” po-
sition.
! Mist (for a single wipe)
For a single wipe of the wipers, pull the lever toward
you. The wipers operate until you release the lever.
! Wiper intermittent time control (if equipped)
When the wiper switch is in the “ ” position, turn
the dial to adjust the operating interval of the wiper.
The operating interval can be adjusted continuously
from the shortest interval to the longest.
Two click stop positions of the dial may help you to aim
at your desired interval.
P
U
L
L
L
To Next Page
Loading...
