3-30
Instruments and controls
jects that you view in convex mirror.
! Adjusting mirrors
To adjust the mirrors by hand, push where indicated
by the arrows.
! Remote control mirror switch
The remote control mirrors operate only when the ig-
nition switch is in the “ON” or “ACC” position.
1) Selection switch
2) Direction control switch
1. Press either end of the selection switch, “L” for the
left, “R” for the right.
2. Move the direction control switch in the direction
you want to move the mirror.
3. Return the selection switch to the neutral position
to prevent unintentional operation.
The mirrors can also be adjusted manually.
OM-U2737
1
2
UB4004BB
To Next Page