11-23
Maintenance and service
– CONTINUED –
! Turbo models
1. Unsnap the two clamps holding the air cleaner
case cover.
1) Air cleaner case cover
2) Air cleaner element
2. Open the air cleaner case cover and remove the air
cleaner element.
3. Clean the inside of the air cleaner cover and case
with a damp cloth and install a new air cleaner ele-
ment.
To install the air cleaner case cover, insert two projec-
tions on the air cleaner case into the slits on the air
cleaner case cover and then snap the two clamps on
the air cleaner case cover.
USB521BA
2
1
USB522BB
To Next Page