1-36
Seat, seatbelt and SRS airbags
4. Put the other end of the tether belt through under
the headrest.
5. Return the seatback to the locked position. Confirm
that the red mark on the locking knob is no longer vis-
ible and check that the seatback is securely locked by
moving it back and forth.
6. Run the lap and shoulder belt through the child re-
straint system following the instructions provided by its
manufacturer.
7. Insert the tongue plate into the buckle.
UB1146BA UB1145BA
UB1155BA
To Next Page