1-43
Seat, seatbelt and SRS airbags
– CONTINUED –
4. Put the other end of the tether belt through under
the headrest.
5. Return the seatback to the locked position. Confirm
that the red mark on the locking knob is no longer vis-
ible and check if the seatback has been securely
locked by moving it back and forth.
6. While following the instructions supplied by the
child restraint system manufacturer, connect the low-
er hooks onto the lower anchorages located at “ ”
marks on the bottom of the rear seatback. When the
hooks are connected, make sure the adjacent seat-
belts are not caught.
UB1146BA
UB1158BA
To Next Page
Loading...
