6-29
Interior and exterior equipments
– CONTINUED –
vided).
Rear crossbar:
Install the rear crossbar in the same manner as the
front crossbar.
NOTE
y The rear crossbar should be positioned just in
front of the rear radius in the roof rail.
y Before each use of the roof crossbar, make sure
the four T-30 crossbar clamp screws have been
checked, and retightened if necessary to 35 lbf·in
(4.0 N·m, 0.41 kgf·m), as outlined in Step #5 above.
0 in
(0 mm)
UB6049BB
UB6050BA
To Next Page