11-83
Maintenance and service
– CONTINUED –
High mount stop light
T Sedan
1. Remove the high mount stop light cover by prying
the edge with a screwdriver.
2. Pull the bulb out of the socket. Install a new bulb.
3. Reinstall the cover.
T Wagon
1. Remove the mounting screw covers by prying the
edge with a screwdriver.
2. Remove the mounting screws using a Phillips
screwdriver and then remove the high mount stop light
cover.
3. Remove the bulbs from the socket by pushing it
and turning counterclockwise. Install a new bulb.
4. Reinstall the cover.
5. Tighten the mounting screws then reinstall the cov-
ers.
NOTE
Other bulbs may be difficult to replace. Have your
UGB546BA
HSB091BA
To Next Page
Loading...
