* Refer to STIS (Subaru Technical Infromation System) *** New Feature
2007 Subaru B9 Tribeca Page 14
June 2006
2007 New Model Update (916)
Clicking on the injector number will turn off that injector. This function is canceled by clicking the
back button or by leaving this screen.
Injection quantity control allows the fuel injection rate to be increased by a maximum of 20% to
determine if a rough idle is the fault of a lean condition.
NOTE: ANY CHANGES MADE IN THE SYSTEM OPERATION CHECK MODE WILL BE
CANCELLED WHEN LEAVING THIS MODE.
To Next Page
Loading...
