Subaru 2013 Impreza - License Plate Light

Black plate (429,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
1) Guide pins
2) Catch
3) Clip
6. Put the rear combination light assem-
bly into place while aligning the 2 guide
pins and a catch with the guide holes and
a clip on the vehicle.
7. Tighten the upper and lower screws.
& License plate light
! 4-door models
1. Open the trunk and remove the clips
from the trunk lid trim with a flat-head
screwdriver.
Maintenance and service 11-41
– CONTINUED –
11