Subaru A3100BE - Removing the Spare Tire

In case of emergency 9-3
– CONTINUED –
the “Temporary spare tire” section in this
chapter for instructions and precautions.
 Removing the spare tire
1. Take the wheel nut wrench and exten-
sion out of the tool bag. Refer to the “Main-
tenance tools” section in this chapter.
2. Remove the subfloor storage lid in the
cargo area.
3. Take out the jack.
4. Remove the access cover.
5. Remove the cap.
6. Locate the hex-headed hoist shaft end
inside the hole.
7. Fit the extension onto the hex-headed
hoist shaft end.
8. Fit the wheel nut wrench onto the ex-
tension.
9. Turn the hoist shaft end counterclock-
900202
900203
900204
900205
900206