Subaru Ascent 2020 - Keyless Access with Push Button Start

5
KEYLESS ACCESS WITH PUSH BUTTON START
(if equipped)
Your Subaru allows for customizing of the door unlock settings. The default setting is when
you unlock the vehicle, only the driver’s door and fuel lid unlock. If preferred, you can set the
vehicle to unlock all doors, the rear gate and the fuel lid. This adjustment can be performed
through the SUBARU STARLINK
™
Multimedia Touchscreen under “Settings”, then “Vehicle”.
Unlocking Using Door Handles
Grip the driver’s door handle to unlock the driver’s door
(or all doors depending on the setting). Grip the front
passenger’s handle to unlock all doors and the rear gate.
Two chirps will sound and the hazard warning ashers
will ash twice.
Locking Using Door Handles
Close all doors and the rear gate and touch the door lock
sensor (two lines) on either front door handle. All doors
and the rear gate will lock. One chirp will sound and the
hazard warning ashers will ash once.
Opening the Rear Gate
Press the rear gate opener button to unlock and open
the rear gate (or also unlock all doors depending on the
setting). Two chirps will sound and the hazard warning
ashers will ash twice.
Locking Using the Rear Gate
Close all doors and the rear gate and press the rear
lock button. All doors and the rear gate will lock. One
chirp will sound and the hazard warning ashers will
ash once.