Start/Stop engine
To start engine:
STEP1: Carry the access key fob, and sit in the driver’s
seat.
STEP2: Apply the parking brake.
STEP3: Shift the select lever into the P position.
STEP4: Depress the brake pedal until the indicator on
the push-button ignition switch turns green.
STEP5: While depressing the brake pedal, press the
push-button ignition switch.
To stop engine:
STEP1: Stop the vehicle completely.
STEP2: Move the select lever to the P position.
STEP3: Press the push-button ignition switch.
OFF (Turned off ) ACC (Orange) ON (Orange)
Change of the power supply (Without starting engine)
The key can be turned from ACC to LOCK
only when the key is pushed in while turning
it and the select lever is in the P position.
Push-button ignition switch (if equipped)
Ignition switch (if equipped)
Every time the button is pressed
without depressing the brake pedal, the
power is switched in the sequence of
OFF
➞
ACC
➞
ON
➞
OFF.
Electronic parking brake switch
P
Operation
indicator
Apply
Release
To Next Page
Loading...
