Subaru ascent - Drivers Area; Headlight Switch;Turn Signal Lever;Front Fog Light Switch (if equipped)

6
◆
Some functions are available on certain models.
◆
For detailed operating and safety information, please refer to your Owner’s Manual.
DRIVER’S AREA
1
Headlights
2
 Headlightasher,High/Lowbeamchange
3
Turn signal
Headlight switch/Turn signal lever/Front fog light switch (if equipped)
A
The high beam assist function automatically changes
the headlight from high beam to low beam (or vice
versa).
The high beam assist function is activated when:
1. The light control switch is in the AUTO position and
the low beam headlights are on automatically.
2. The turn signal lever is pushed forward.
When the high beam assist function is activated,
the indicator (green) on the combination meter will
illuminate.
High beam assist function (if equipped)
High beam assist indicator
D
H
FG
E
3
3
1
2
B C
A