296
3-2. Using the audio system
BRZ_EGE
Scanning radio stations
■ Scanning the preset radio stations
Press and hold until you hear a beep.
Preset stations will be played for 5 seconds each.
When the desired station is reached, press the button once
again.
■ Scanning all radio stations within range
Press .
All stations with reception will be played for 5 seconds each.
When the desired station is reached, press the button once
again.
■ When the battery is disconnected
Stations presets are erased.
■ Reception sensitivity
● Maintaining perfect radio reception at all times is difficult due to the con-
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains and transmitters.
● When is used, automatic station selection may not be possible.
● The radio antenna is mounted on the rear roof. The antenna can be
removed from the base by turning it.
STEP
1
STEP
2
STEP
1
STEP
2
To Next Page
Loading...
