23
– CONTINUED –
4. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the connectors of the
child restraint system to the anchor bars.
When the connectors are fastened, make
sure that the adjacent seatbelts are not
caught.
5. Before seating a child in the child re-
straint system, try to move it back and
forth and right and left to verify that it is
held securely in position.
4-door models
5-door models
6. Attach the child restraint fixing clip to
the child restraint upper anchorage and
tighten the upper anchorage strap. For ad-
ditional instructions, refer to the “Child re-
straint anchorages” section in this manual.
For further information, refer to the in-
struction manual supplied by the child re-
straint system manufacturer.
S00990 101808
102166
101533
B1301AE-A.fm 23 ページ ２０１６年８月２９日 月曜日 午前１０時４分
To Next Page
Loading...
