Subaru Outback 2022 - Settings and Updates; Sound

SOUND
To change the sound settings, press the “Home” button and select “Settings”, then
“Sound”. Choose the setting you want to change.
SETTING FUNCTION
Audio In the audio settings, you may have the following setting
capabilities:
• Sound Customization — This function allows you to set
the Equalizer, Balance/Fader and Vocal Image Control.
• Equalizer — How good an audio program sounds is
largely determined by the mix of the treble, mid and
bass levels. In fact, different kinds of music and vocal
programs usually sound better with different mixes of
treble, mid and bass.
•
Balance/Fader — A good balance of the left and
right stereo channels and of the front and rear sound
levels is also important.
Keep in mind that when listening to a stereo recording
or broadcast, changing the right/left balance will
increase the volume of 1 group of sounds while
decreasing the volume of another.
•
Vocal Image Control — Extracts only vocal sound
from whole sound and adjusts volume balance off
vocals only.
•
Sound Restorer — This function plays compressed audio
with quality near original sound by adding the
complement signal of high tone.
•
Virtual Bass — This function corrects the bass sound by
adding harmonic sound.
•
Dynamic Beat Enhancer — This function expands the
dynamic range lost in data compression and creates a
sharp beat sound.
•
Speed Volume Control — The system adjusts to the
optimum volume and tone quality according to vehicle
speed to compensate for increased vehicle noise.
• AUX Volume Gain — Sets the AUX volume gain.
Navigation Guidance
Volume
Sets the navigation prompt volume.
Notification Volume Sets the interrupt guidance volume.
Beep Sound Setting Turns the tone sound on or off.
Beep Sound Volume Sets the tone sound volume.
Phone Ringtone Volume Sets the ringtone volume.
Incoming Call Volume Sets the volume of the received call.
Call Volume Sets the call volume.
SMS/MMS Ringtone
Volume
Sets the SMS/MMS ringtone volume.
SMS/MMS Read Out
Volume
Sets the SMS/MMS read out volume.
Voice Volume Sets the voice recognition prompts volume.
SETTINGS AND UPDATES
97