Subcold TREK Series - Page 6

Operang Instrucons for Your Appliance
Powering On and O:
To Power On: Briey press and hold the POWER buon for 1 second. This will turn on the appliance
and acvate the display screen.
To Power O: Press and hold the POWER buon for 3 seconds.
Using the Control Panel:
Unlocking the Screen: Aer switching the appliance on, if you need to use the control panel, start by
unlocking the screen. Press and hold the SET buon for 3 seconds; the lock symbol will then
disappear from the display. If no acon is taken within 30 seconds, the screen will lock automacally,
and the lock symbol will re-appear.
Adjusng Temperature: With the screen unlocked, use the + or - buons to set your desired
temperature within the range of -22°C to +24°C.
Switching Modes and Units: Press the SET buon to toggle between dierent operang modes and
unit measurements.
Temperature Control and Baery Sengs:
Compressor Operaon: The compressor will stop operang once the internal temperature reaches
the set level.
Baery Sengs:
Car Baery: Use the default seng of M gear.
External or Backup Baery: Switch to L gear.
Operang Instrucons & Control Panel
V1 6