EasyManua.ls Logo

Subcold TREK Series - Disconnecting & Handling Instructions

Subcold TREK Series
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to Safely Disconnect Your Compressor Car Fridge
Switch O the Fridge: Before unplugging the appliance, ensure to turn o the power using the
on/o switch on the control panel. This prevents any electrical sparks or damage.
Unplug the Appliance:
Direct Connecon: If your fridge is directly connected to a 12V or 24V DC socket in your
vehicle, carefully pull the plug out by holding the connector rather than the cable to
avoid damaging the wires.
AC Adapter Use: If connected to an AC power source via an adapter, rst switch o the
AC power outlet before unplugging to eliminate any residual current.
Inspect the Cord: Aer unplugging, check the power cord and plug for signs of wear or damage.
Should you nd any fraying or cracks, do not use the fridge unl it has been inspected and
repaired by a professional.
Secure the Fridge: When disconnecng the fridge for transport or storage, make sure it is
securely fastened to prevent any movement that might cause damage. Allow the fridge to reach
room temperature before moving to minimise the risk of internal damage.
Clean and Venlate: Aer disconnecng, use the opportunity to clean both the interior and
exterior of the fridge as per the manufacturers guidelines. Leave the door open for a few hours
to venlate and prevent mildew or unpleasant smells if the fridge is to be stored for a lengthy
period.
By adhering to these steps, you can ensure that your compressor car fridge is disconnected safely
and eecvely, thus preserving its funconality and prolonging its life.
Disconnecng & Handling Instrucons
Using the App: With the Bluetooth app, you can access various features of your fridge:
Adjust Sengs: Tap the lock icon to unlock; it will automacally re-lock aer 30 seconds of
inacvity.
Temperature Controls: Check or change the temperature sengs and the unit of measurement.
Voltage Monitoring: Check or modify voltage monitor sengs.
Compressor Speed: Adjust compressor speed sengs.
Power Controls: Turn the fridge on or o.
Connecon Status: A paired icon indicates that you are within Bluetooth range and connected to
the fridge.
By following these instrucons, you can ensure full funconality and convenience with your
Bluetooth-enabled fridge.
Operang Instrucons & Control Panel
V1 9

Related product manuals