Bottom Duct Kit W/Gasket, SF Models Except SF-42, (F), SH35 (F)
Wall Thermostats are included with All Models, except SF.
Vent Assemblies are included with all units, except DD.
INSTALLATION
There are several important aspects of the installation which will pertain to all Suburban forced draft furnaces, regardless of the model or the
method in which they are installed. They are:
1. Selecting a Location
2. Venting
3. Return Air
4. Ducting
Refer to the furnace installation manual for all installation requirements.
Location and Installation- Locate the furnace near lengthwise center of the coach. Choose a location for installation out of the way of
wires, pipes, etc. which might interfere with the installation. Adhere to the minimum clearances from cabinet to combustible
construction as listed in the installation manual for your specific furnace model. Secure furnace cabinet to the floor of the coach
using the holes provided in the furnace cabinet.
To Next Page
Loading...
Need help?
General
