Need help?Do you have a question about the Subzero SZC-300 and is the answer not in the manual?
Do not open the cover. Refer servicing to qualified personnel for internal parts.
Avoid heat sources, direct sunlight, dust, vibration, shock, liquids, and open flames.
Combination XLR/TRS input for connecting microphones or instruments.
Adjusts input volume and indicates clipping with a clip light.
Switches between low impedance for mics and high impedance for instruments.
Enables +48V phantom power for condenser microphones.
Guide to installing the necessary drivers and software on Windows systems.
Overview of the SubZero interface control panel for Windows users.
Instructions for using the control panel application on Mac OS X.
Do not open the cover. Refer servicing to qualified personnel for internal parts.
Avoid heat sources, direct sunlight, dust, vibration, shock, liquids, and open flames.
Combination XLR/TRS input for connecting microphones or instruments.
Adjusts input volume and indicates clipping with a clip light.
Switches between low impedance for mics and high impedance for instruments.
Enables +48V phantom power for condenser microphones.
Guide to installing the necessary drivers and software on Windows systems.
Overview of the SubZero interface control panel for Windows users.
Instructions for using the control panel application on Mac OS X.
General| Type | Condenser |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Response | 20Hz - 20kHz |
| Load Impedance | ≥1000Ω |
| Output Impedance | 200Ω ±30% (at 1kHz) |
| Power Requirement | 48V Phantom Power |
To Next Page
