Need help?Do you have a question about the Subzero MINICONTROL and is the answer not in the manual?
General| Brand | Subzero |
|---|---|
| Model | MINICONTROL |
| Category | Recording Equipment |
| Language | English |
Transmits control message CC64. This button is not editable.
Adjusts program change message. Dial is not editable.
Transmits control message CC67. This button is not editable.
Transmits control change message to selected function in DAW.
Transmits control change message to selected function in DAW.
Connects the supplied USB cable.
Adjusts master volume. Button is not editable.
Selects current settings bank. Settings can be changed via Software Editor.
Displays the currently used bank.
Assigns various functions. Function assignment via Software Editor.
Assigns various functions. Function assignment via Software Editor.
Transmits control change message to selected function in DAW.
Activates/deactivates loop function in DAW.
Rewinds through the current project in DAW.
Fast forwards through the current project in DAW.
Stops the current project in DAW.
Plays the current project in DAW.
Activates/deactivates record function in DAW.
Specifies MIDI channel for note and other messages. Set to match DAW.
Specifies MIDI channel for transport controls. Set to match DAW.
Specifies MIDI channel for MIDI control groups. Set to match DAW.
Details on enabling/disabling dials, CC numbers, and value ranges.
Details on enabling/disabling faders, CC numbers, and value ranges.
Configuring type, behavior, CC numbers for assignable buttons.
Configuring control change or MMC messages for transport buttons.
To Next Page
