8
REMOVING THE MIXER
1. Please ensure power to the mixer has been
turned off.
2. Use a screwdriver to turn the screw on the mixer
from LOCK to OPEN until it clicks.
3. Securely hold the mixer’s handles to remove it
from the speaker enclosure.
CAUTION!
Please only use the mixer handles when
transporting or moving the mixer unit.
NOTE:
The mixer can also be used when installed in the
speaker.
When you install the mixer into the speaker, make
sure to match the indentations on the speaker
cabinet to the corresponding parts on the mixer,
and then turn the screw from OPEN to LOCK until it
clicks.
To Next Page
Loading...
