INSTALLATION – INTRODUCTION
Installation must only be carried out by properly qualified person.
Make sure that the main electrical supply in the installation room is disconnected before
starting the electrical operations of assembly.
The appliance must not be installed near curtains, drapes, etc. as these could compromise
the correct working of the product.
Make sure that, once installed, the fan blades are placed not less than 2,30m away from the
floor below to the product. In case of installation of more than one appliance, the distance
between the products must be at least 3 metres.
Before assembling or using this product, carefully read all the instructions in this manual and
be sure to own all the necessary material for the installation.
Scrupulously follow the instructions in this manual.
INSTALLATION – PREPARATION
ØD=160mm