EasyManua.ls Logo

Südwind Ambientika SOLO - Configuration (ADVANCED); Reset (WIRELESS)

Südwind Ambientika SOLO
111 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
100
6.0 RECOMMENDATION ON THE MAINTENANCE TIMES
All the device maintenance operations are intended solely and exclusively to qualified personnel.
Make sure that the network connection in the place of installation is disconnected before the
maintenance operations.
Once the product is installed, it must represent the component arrangement as that in the image
above.It is recommended to carry out cleansing of the filters (8) and the ceramic heat exchanger (7)
every 3 months. It is advisable to change filters every 2 years. Contact your dealer for the
replacement filters.
SOLO VERSION
This version does not include the warning signal for filters cleansing / replacement.
ADVANCED VERSION
Every 2000 operating hours, the product will stop working and the luminous indicator, placed in the
lower right corner, will emit a continuous luminous red signal.
Carry out cleansing of the exchanger and the filters, as specified in the paragraph. Replace the
filters when necessary
WIRELESS VERSION
Every 2000 operating hours, the product will stop working and the luminous indicator, placed in the
lower right corner, will emit a continuous luminous red signal.
Carry out cleansing of the exchanger and the filters, as specified in the paragraph. Replace the
filters when necessary.

Table of Contents

Other manuals for Südwind Ambientika SOLO

Related product manuals