FOR THE CORRECT POSITIONING AND OPERATION OF THE PROP LOCK
PROPELLER IT IS ESSENTIAL THAT THE PLUG (33) IS CORRESPONDING TO THE
SEAT (34)
28.4. MAINTENANCE PROP LOCK PROPELLER
The prop lock propeller does not require specific maintenance. However, would be appropriate make sure that
everything is clean and free from debris.
THE USE OF PROTECTIVE GLOVES IS ALWAYS MANDATORY
WHEN REMOVING AND REPLACING THE PROPELLER UNDERWATER, BE
CAREFUL NOT TO DROP IT: THE PROPLOCK PROPELLER SINKS!
WHEN THE SAFETY CLUTCH IS TRIGGERED, STOP THE DPV IMMEDIATELY
AVOIDING THAT THE PROPELLER UNSCREWS COMPLETELY. BEFORE
RESTARTING MAKE SURE THE PROPELLER IS SCREWED BACK IN PROPERLY.
Be careful when positioning the SCOOTER vertically on the conveyor, the
propeller must not touch the ground or other object.
To Next Page
Loading...
