To Next PageTo Next Page
Need help?Do you have a question about the SUHNER ROTOstar and is the answer not in the manual?
Lists the primary components and controls of the ROTOstar machine.
Details the technical data including power, voltage, speeds, and sound levels.
Identifies the various parts that make up the flexible shaft assembly.
Specifies different types of flexible shafts and their maximum RPM.
Guides users on how to adjust the machine's operating speed using the excenter switch.
Details the steps for connecting the flexible shaft to the motor.
Explains how to connect the SAK safety clutch for safe operation.
Describes the procedure for attaching toolholders to the machine.
Outlines the process for initiating operation using the SAK safety clutch.
Lists specific accessories for the ROTOstar machine, such as FH10, WI10, BSG10, FSM.
Lists vibration values for different toolholder types under specific test conditions.
Provides general advice on storing, cleaning, and maintaining the machine.
Details maintenance steps for the flexible shaft, including re-greasing.
Details the FH 10 straight toolholder, its specifications, and machine elements.
Details the WI 10 right angle toolholder, its specifications, and machine elements.
Details the BSG 10 belt grinding attachment, its specifications, and machine elements.
Lists components and technical specifications for the FSM right angle grinder.
Explains the procedure for changing tools and abrasives on the FSM grinder.
General