Need help?Do you have a question about the Suhr Badger 30 and is the answer not in the manual?
Power and Outputs| output power | 18 Watts |
|---|---|
| dual speaker outputs | 4Ω, 8Ω & 16Ω impedance |
Weight and Dimensions| head dimensions | 20.5" wide x 9.25" high x 8.25" deep |
|---|---|
| combo dimensions | 20.5" wide x 24.75" high x 11.0" deep |
| head weight | 31 lbs |
| combo weight | 66 lbs |
Proper procedure for powering the amplifier on and off to prolong tube life.
Details on how Power Scaling adjusts wattage and tone at lower volumes.
Explains the Bass, Middle, and Treble controls and their recommended usage.
Describes how the Gain control affects preamp gain and tone.
Explains the Drive control's role in feeding the power section and acting as a master volume.
Details on the two speaker outputs and the 3-way impedance selector switch.
Information on using the effects loop with pedals and rack gear for unity gain.
Explains the H.T. and A.C. fuses, their ratings, and cautions for replacement.
Identifies the specific preamp (12AX7) and power tubes (EL84) used in the Badger 30.
Recommended control settings for achieving maximum clean headroom.
Suggested settings for a balanced, slightly overdriven tone.
Control settings for achieving a classic crunch sound.
Recommended settings for a saturated lead guitar tone with high gain.
Details on the amplifier's power output, tube configuration, and speaker types.
Physical cabinet material, dimensions, and weight for head and combo.
Lists included accessories and optional matching cabinets.
Outlines JST's warranty terms for workmanship and electronic components.
Details what the warranty does not cover and how international customers should proceed.
To Next Page
