Need help?Do you have a question about the Suhr PT-15 I.R. and is the answer not in the manual?
Covers controls for Channel 1 (Clean) and Channels 2/3 (High-Gain), including gain, level, EQ, and bright switches.
Explains the Master Volume and Presence knobs affecting overall tone.
Details controls for selecting and linking IRs, including Bank/Cab select and IR Level.
Describes the Input, Headphone Out, and Aux In jacks.
Covers the Power, Standby switches, and the Channel Select button.
Explains the speaker outputs, reactive load options, and impedance selector.
Covers FX Loop Send/Return, Line Out, and USB In connections.
Details the Mains Input and H.T./Mains Fuse locations.
Includes the I.R. Bypass button and Foot Switch jack.
Speaker output using reactive load in parallel with cabinet, reducing volume.
Speaker output that disables internal reactive load for full power to cabinet.
Switch to match the impedance of connected speaker cabinets or internal load.
Direct line level output supporting balanced and unbalanced connections.
Allows bypassing the IR filter to hear the raw amp tone.
Instructions for connecting external effects pedals or chains to the FX loop.
Guide on using the footswitch to control channels and other functions.
Identifies the types and positions of tubes used in the PT-15 I.R.
Specifies mains and HT fuse ratings and power requirements for different regions.
To Next Page
General
