EasyManua.ls Logo

Suhr CORSO User Manual

Suhr CORSO
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CORSO
USER GUIDE
®
ESHERCONFESSIONAL
Question and Answer IconNeed help?

Do you have a question about the Suhr CORSO and is the answer not in the manual?

Suhr CORSO Specifications

General IconGeneral
output5 Watts
fuseT1A/250V (Slo-Blow)
power section tubes2-12BH7A
input stage tube1-12AU7
tone and phase inverter tubes2-12AX7
Weight and Dimensions IconWeight and Dimensions
dimensions13” x 7” x 8.5”
weight11.4 lbs

Summary

Overview

Front Panel Switches

Bright Switch

Engaging this switch boosts upper mid frequencies, adding clarity and definition to your tone.

Mid Switch

Engaging this switch boosts lower mid frequencies, thickening your overdriven rhythm and lead tones.

Gain Switch

Adds 12dB of gain, increasing sustain and emphasizing upper harmonics for solos.

Presence Switch

Boosts midrange frequencies, giving your tone better definition and clarity.

Deep Switch

Boosts the bottom-end, adding low-end thump and body to any style.

Front Panel Control Knobs

Drive Control

Adjusts pre-amp overdrive. Use with Gain switch for a wide range of tones.

Treble Control

Emphasizes upper frequencies clockwise; produces warmer sound counter-clockwise for lead tones.

Bass Control

Increases lower frequencies clockwise; tightens bottom-end counter-clockwise.

Power Control

Controls overall output volume. Acts as a load when fully counter-clockwise for Line Out use.

Back Panel Connections

Speaker Outputs

Two 8-ohm outputs. Avoid damage by using minimum power or a speaker load.

Line Out

Unbalanced 1/4" output for mixers or recording devices, providing full amplifier sound.

Important Safety Instructions

Specifications and Warranty

Related product manuals