CONTROL KNOBS
FRONT PANEL
DRIVE:
Adjusts the amount of pre-amp overdrive added to your signal. Use
the Drive control in conjunction with the Gain switch to experience
the wide range of tones that Corso has to offer.
Clean: settings between 1-2 offer a variety of full bodied clean tones
with excellent clarity
Classic Crunch: settings between 3-4 (with gain switch in the on
position) offer a variety of British crunch rhythm tones with excellent
midrange cut and articulation
High Gain: settings between 5-7 (with gain switch in the on position)
offer a dramatic increase in gain with extended low-end thump
without loss of definition - taking you from Hard Rock to 80’s Heavy
Metal
Metal/Alternative (Alt) Tuning: settings between 8 and higher (with
gain switch in the on position) offer increased saturation, harmonics
(for additional sustain) and low end emphasis when playing drop and
alt tuning styles
TREBLE:
Turning the control
clockwise emphasizes
the upper frequencies. !
While turning the control
counter clockwise
produces a warmer
sound, which is excellent
for dialing in smoother
fluid-like lead tones, and
is also well suited for
Jazz styles.
BASS:
Turning the control
clockwise increases the
lower frequencies,
providing a fuller low-end
response. While turning
the control counter
clockwise reduces the
bass, which tightens up
the bottom-end. This can
be very useful when
playing at louder
volumes, and at higher
gain settings. !!
POWER:
A volume control that
adjusts the overall output
of your signal. Fully
counter-clockwise (0) the
Power control acts as a
Load, allowing you to
take complete advantage
of Corso’s Line Out
without having to be
connected to a speaker
cabinet.!
NOTE: The Power control
only affects Corso’s
speaker outputs, this
does not alter/change the
output level of the Line
Out. !!
To Next Page
Loading...
