To Next PageTo Next Page
Need help?Do you have a question about the Sulky XEOS PRO and is the answer not in the manual?
General safety rules for tractor/machine assembly and compliance with legislation.
Guidelines for correct operation, maintenance, and intended use of the machine.
Procedures and precautions for coupling the machine to the tractor.
Safety and maintenance for power take-off and universal drive shafts.
Procedures for servicing, repair, and fault finding.
Safety measures for the operator, including PPE and first aid.
Guidelines for safe disposal of waste and minimizing environmental impact.
Checks to perform on delivery, ensuring completeness and absence of foreign bodies.
Instructions on how to safely lift and move the machine using designated points.
Procedures for attaching the seed drill to the soil cultivation implement.
Details the hydraulic circuit requirements and free return for the fan.
Explains the Pilot console, power supply requirements, and lighting connection.
Specifies turbine speed requirements, oil flow, pressure, and hydraulic connection.
Formulas and diagrams for calculating tractor weight distribution and ballast.
Compliance with road traffic rules and dimensional limits for transport.
Procedure to stop seed distribution for cultivator-only use.
Step-by-step guide for performing headland turns efficiently.
Rules for loading the seed drill only when stationary and safety for the platform.
Steps to open hopper cover, check for foreign bodies, and close cover. Notes on rodent prevention.
Details on adjusting fan speed and choke for different seed types and drill widths.
How to select the correct rotation speed for the metering mechanism based on seed type.
Instructions for securing markers for transport and releasing oil pressure.
Adjusting markers for tractor centerline marking and refining settings.
Instructions for fitting markers to SULKY HR rotary harrows and safety notes.
Details on setting following wheel load pressure and adjusting drilling depth.
How to adjust drilling depth using tie rods, not the wheels.
Instructions for adjusting tine angle and pressure, and transport settings.
How to close half the seed rows using the Pilot console.
Electronic control of tramlining for later crop treatments.
How to adjust tramline track width and disc angle of attack.
Daily checks on seed flow, pneumatic system, and transport tubes.
Steps for disconnecting power, removing gearbox, sprocket, and inspecting parts.
Specific instructions for cleaning the tank, seed system, and avoiding water damage.
Details on which parts to grease and frequency, and what not to grease (metering device).
Provides detailed technical data for different machine models (capacity, rows, spacing, weight).
Explains the purpose of safety labels and the importance of keeping them legible.
Detailed steps for emptying the hopper, metering unit, and pipes.
Confirms the hectare counter is integrated with the Pilot console.
Advises on adding scrapers for depth wheels in difficult conditions and their removability.
Describes the optional hopper lighting and its 12V power supply.
Table showing seed rates (kg/ha) for various crops at normal metering speed.
Table showing seed rates (kg/ha) for various crops at micro metering speed.
General| Brand | Sulky |
|---|---|
| Model | XEOS PRO |
| Category | Farm Equipment |
| Language | English |
