Sullair DMD-5 User Manual

Failure to follow the instructions
and procedures in this manual or,
misuse of this equipment will
VOID its warranty!
WARRANTY NOTICE
PART NUMBER:
KEEP FOR
FUTURE
REFERENCE
USER/SERVICE MANUAL
©
SULLAIR CORPORATION
The information in this manual is current
as of its publication date, and applies to
compressor serial number:
and all subsequent serial numbers.
02250194-767 R00
MODULAR REGENERATIVE DRYERS
DMD SERIES (DMD-3 TO DMD-240)
0611MD0001

Sullair DMD-5 Specifications

General

Brand	Sullair
Model	DMD-5
Category	Dryer
Language	English

Summary

Warranty Notice

Safety Information and Precautions

Safety Information

Observe national, state, and local safety regulations for pressure vessels.

Safety Symbol Definitions

Important Warnings

Highlights critical warnings regarding hazards and safe operation.

Proper Use of the Dryer

Defines the intended use and limitations of the dryer equipment.

Pressure Equipment Usage Instructions

Provides essential guidelines for safe operation of pressure equipment.

Dryer Installation Guide

Essential Installation Information

Key considerations for installing the dryer correctly and safely.

Technical Specification Overview

Detailed Dryer Specifications

Startup and Operation Procedures

Initial Startup

Steps for initial startup and basic operation of the dryer.

Startup Without By-Pass Line

Startup Using By-Pass Line

Normal Operation

Describes the automatic operation and changeover cycles of the dryer.

Shutdown and Depressurization Procedure

Steps for safely shutting down and depressurizing the dryer.

Alarm Signal Information

Maintenance and Servicing

Maintenance Guidelines

Daily Checks

General Service Recommendations

Troubleshooting Common Issues

Poor Dewpoint Troubleshooting

Addresses issues causing inadequate air dryness and potential causes.

Electrical Fault Diagnosis

Covers problems related to power indicators and electrical system faults.

Failure to Purge Issues

Diagnoses problems with the purge cycle and depressurization.

Outlet Air Flow Stoppage

Investigates reasons for complete cessation of outlet air flow.

Constant Depressurization Problems