TABLE OF CONTENTS
(CONTINUED)
Section 7
(CONTINUED)
PAGE
MAINTENANCE
33
COMPRESSOR/MOTOR REMOVAL
33
COMPRESSOR COOLER CLEANING- AIR-COOLED
Section 8
TROUBLESHOOTING
37
8.1 INTRODUCTION--STANDARD ELECTRO/MECHANICAL
37
8.2 TROUBLESHOOTING--STANDARD
ELECTRO/MECHANICAL
38
8.3 OPTIONAL SUPERVISOR II
39
8.4 TROUBLESHOOTING--SUPERVISOR II
40
8.5 CALIBRATION
Section 9
ILLUSTRATIONS AND
PARTS LIST
43
9.1 PROCEDURE FOR O RDERING PARTS
43
9.2 RECOMMENDED SPARE PARTS LIST
44
9.3 FRAME, MOTOR, COMPRESSOR AND PARTS
46
9.4 COMPRESSOR AND PARTS
50
9.5 MOTOR AND PARTS
52
9.6 INLET FILTER AND PARTS
54
9.7 COOLING SYSTEM AND PARTS -- AIR-COOLED
58
9.8 COOLING SYSTEM AND PARTS -- WATER-COOLED
64
9.9 CONTROL BOX AND PARTS -- STANDARD
70
9.9A CONTROL BOX AND PARTS -- SUPERVISOR II
74
9.9B CONTROL PANEL AND PARTS -- ELECTRO/MECHANICAL
76
9.10 CANOPY, ACOUSTICAL PANEL AND PARTS
80
9.11 DECAL GROUP
84
9.12 WIRING DIAGRAM -- FULL VOLTAGE -- STANDARD ELECTRO/
MECHANICAL
85
9.13 WIRING DIAGRAM -- FULL VOLTAGE -- SUPERVISOR II
86
9.14 WIRING DIAGRAM -- WYE--DELTA 50/ 60HZ -- ELECTRO/
MECHANICAL
87
9.15 WIRING DIAGRAM --WYE--DELTA 50/ 60HZ -- SUPERVISOR II
88
9.16 WIRING DIAGRAM -- 50 HZ (EUROPE) -- ELECTRO /
MECHANICAL
89
9.17 WIRING DIAGRAM -- 50 HZ (EUROPE) -- SUPERVISOR II
90
9.18 TORQUE TABLE FOR METRIC FASTENERS (+/- 10%)
To Next Page
Loading...
