Sullair ES-6 10H - Page 45

Section 7
ILLUSTRATIONS AND PARTS LIST
39
7.8 COMPRESSOR SYSTEM
key part
number description number quantity
1 capscrew, ferry hd 1/4”--20 x 1 1/4” 828404--125 5
2 cover , outlet 250025--315 1
3 locknut, female M17 x 1 02250055--135 1
4 wavespring, female 02250055--485 1
5 bearing, taper 499080--203 2
6 locknut, male M25 x 1 02250055--135 1
7 wavespring, male 02250047--887 1
8 bearing, taper 499025--005 2
9 capscrew, ferry hd 5/16”--18 x 1” 828405--100 3
10 washer, metric elt sm 8 x 15 865308--150 1
11 capscrew, socket hd 1/4”--20 x 1/4” 828304--025 2
12 housing, stator 250029--910 1
13 capscrew, ferry hd 5/16”--18 x 2 1/4” 828405--225 2
14 washer, seal 499065--007 2
15 pin, dowel 3/8” x 1” 499045--032 4
16 rotor, female “E” profile 02250055--489 1
17 rotor, male “E” profile 02250055--490 1
18 capscrew, ferry hd 3/8”--16 x 3 3/4” 829106--375 2
19 plate, inlet 250030--828 1
20 hose, nylon 1/4” 02250054--861
21 elbow, tube 90
_
M 1/4” x 1/4” 250025--850 3
22 nipple, pipe 1/4”NPT x close 823204--000 1
23 valve, regulator
(I)
250017--280 1
24 tee, tube 1/4” 250025--835 1
25 screw, drive rod plated #8 x 3/8” 839608--060 2
26 plate, identification 250026--859 1
27 bearing, cylinder roll plain 499082--705 1
28 orifice, gear spray (mounting location) 250030--545 1
29 bearing, needle roller steel 250023--213 1
30 retainer, inlet bearing 250025--435 1
31 screw, machine flat head 1/4”--20 x 1/2” 831204--050 1
32 capscrew, ferry hd 5/16”--18 x 1 1/2” 828405--150 2
33 tube, separator fluid return 250025--865 1
34 fitting, separator fluid return 250025--870 1
(Continued on page 41)
(I)
For maintenance on pressure regulator valve no. 250017-280, order repair kit no. 250019-453.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR