Sullair ES-6 - Page 41

Section 7
ILLUSTRATIONS AND PARTS LIST
37
7.7 COMPRESSOR SYSTEM
key part
number description number quantity
1 capscrew, ferry hd 1/4"-20 x 1 1/4" 828404-125 5
2 cover, outlet 250025-315 1
3 locknut, female M17 x 1 02250055-135 1
4 wavespring, female 02250055-485 1
5 bearing, taper 499080-203 2
6 locknut, male M25 x 1 02250055-135 1
7 wavespring, male 02250047-887 1
8 bearing, taper 499025-005 2
9 capscrew, ferry hd 5/16"-18 x 1" 828405-100 3
10 washer, metric elt sm 8 x 15 865308-150 1
11 capscrew, socket hd 1/4"-20 x 1/4" 828304-025 2
12 housing, stator 250029-910 1
13 capscrew, ferry hd 5/16"-18 x 2 1/4" 828405-225 2
14 washer, seal 499065-007 2
15 pin, dowel 3/8" x 1" 499045-032 4
16 rotor, female "E" profile 02250055-489 1
17 rotor, male "E" profile 02250055-490 1
18 capscrew, ferry hd 3/8"-16 x 3 3/4" 829106-375 2
19 plate, inlet 250030-828 1
20 hose, nylon 1/4" 842215-004
21 elbow, tube 90°M 1/4" x 1/4" 250025-850 3
22 nipple, pipe 1/4"NPT x close 823204-000 1
23 valve, blowdown 1/4"NPT (I) 250025-655 1
24 tee, tube 1/4" 250025-835 1
25 screw, drive rod plated #8 x 3/8" 839608-060 2
26 plate, identification 250026-859 1
27 bearing, cylinder roll plain 499082-705 1
28 orifice, gear spray (mounting location) 250030-545 1
29 bearing, needle roller steel 250023-213 1
30 retainer, inlet bearing 250025-435 1
31 screw, machine flat head 1/4"-20 x 1/2" 831204-050 1
32 capscrew, ferry hd 5/16"-18 x 1 1/2" 828405-150 2
(Continued on page 39)
(I) For maintenance on blowdown valve no. 250025-655, order repair kit no. 250031-772.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR