Section 10
ILLUSTRATIONS AND PARTS LIST
39
10.3 INLET CONTROL, SEAL/DRIVE GEAR AND PARTS
key part
number description number quantity
1 housing, drive 02250045-827 1
2 screw, flat hd M6 x 12MM 865006-012 1
3 washer 02250048-229 1
4 seat, minimum pressure valve (I) 02250047-162 1
5 stem, minimum pressure valve 02250047-163 1
6 spring, minimum pressure valve (I) 02250047-296 1
7 piston, minimum pressure valve 02250048-908 1
8 o-ring, viton 1 1/4” x 3/32” (I) 826502-124 1
9 spring, minimum pressure valve 02250047-161 1
10 cap, minimum pressure valve 250035-587 1
11 elbow, 90 M 1/4” x 1/4” 250025-850 1
12 elbow, 45 37FL 1.312” 02250046-908 1
13 hose, medium pressure 1” x 11.25” 02250107-919 1
14 o-ring viton 3 1/4” x 3/32” (II) 826502-152 1
15 bearing 499080-206 1
16 gear consult factory 1
17 shaft, input 02250050-540 1
18 key, 10 x 8 x 70 865210-070 1
19 housing, cover drive 02250055-887 1
20 bearing 499080-210 1
21 o-ring, viton 3 1/4” x 3/32” (II) 826502-152 1
22 seal (II) 02250048-316 1
23 shim, set 3.5 x 3.0 220645 1
24 cover, shaft seal 250035-254 1
25 capscrew, M8 x 20MM 829308-020 7
26 hose, nylon 1/4” 02250054-861 5 ft.
27 tee, swivel 1/4” x 1/4” 250025-835 1
28 cover, inlet control 02250119-254 1
29 o-ring, viton 3 1/8” x 1/8” 826502-235 1
30 o-ring, viton 2” x 1/8” 826502-226 1
31 piston, inlet valve 02250048-909 1
32 spring, inlet piston 250042-087 1
(Continued on page 41)
(I) For maintenance on minimum pressure valve, order kit no. 02250050-612 (Note: Items not sold separately).
(II) For maintenance on ES-8 shaft seal, order tool kit part numbers 02250061-961 and 001932-005.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
