EasyManua.ls Logo

Sullair RD-0700-575-3-60-A User Manual

Sullair RD-0700-575-3-60-A
268 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Failure to follow the instructions
and procedures in this manual or,
misuse of this equipment will
VOID its warranty!
WARRANTY NOTICE
USER/SERVICE MANUAL
REFRIGERATED DRYERS
RH—HIGH TEMPERATURE
RN—NON-CYCLING
RD—DIGITAL CYCLING
PART NUMBER:
KEEP FOR
FUTURE
REFERENCE
©
SULLAIR CORPORATION
02250195-401 R00
The information in this manual is current
as of its publication date, and applies to
compressor serial number:
(RH) 0611SA0198
(RN) 4810SA0001
(RD) 0711SA0263
and all subsequent serial numbers.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sullair RD-0700-575-3-60-A and is the answer not in the manual?

Sullair RD-0700-575-3-60-A Specifications

General IconGeneral
ModelRD-0700-575-3-60-A
Capacity700 SCFM
TypeRefrigerated
Voltage575V/3Ph/60Hz
Dew Point38°F
Inlet Temperature120°F (49°C)

Summary

Section 1 Safety

1.1 Safety Information

Key safety guidelines, regulations, and warnings for dryer operation and handling.

Section 2 RH Series Refrigerated High Temperature Compressed Air Dryer

2.1 Specifications

Lists operational parameters like pressure, temperature, and ambient conditions.

2.3 Typical Installation

Illustrates a standard dryer installation setup with compressor and receiver.

2.4 Safety Regulations

Covers critical safety rules for installation, operation, maintenance, and handling.

2.6 Dryer Operation Procedure

Step-by-step guide for starting and shutting down the dryer.

2.14 Troubleshooting

Provides solutions for common dryer problems and their potential causes.

Section 3 RN & RD Series Refrigerated Non-Cycling Compressed Air Dryer

3.2 Specifications

Lists minimum and maximum operating conditions for RN & RD series dryers.

3.3 Safety Instructions

Outlines safety rules and precautions for operating the RN & RD series.

3.7 Installation Layout Requirements

Specifies requirements for dryer installation, including clearance and ambient temperature.

3.11 Principle of Operation

Explains how the refrigerant and compressed air circuits function.

3.16 Installation

Provides installation instructions, emphasizing qualified personnel and safety devices.

3.18 Operating Procedures

Details the sequence of operations for initial start-up and subsequent runs.

3.60 Maintenance

Outlines maintenance tasks for engineers/technicians and users.

3.62 Troubleshooting

Guide to diagnose and resolve common dryer problems and their potential causes.

Section 4 E-680 Controller for Refrigerant Dryers

4.1 Description

Details the features and capabilities of the E-680 controller.

4.2 Operation

Explains the front panel view, buttons, and basic operation of the controller.

4.2.3 Configuration Mode

Guides on entering and navigating the controller's configuration settings.

4.12 ED—RD1600 Air Cooled

Exploded view and part list for the ED-RD1600 AIR COOLED model.

4.23 ID—RD1600-2000 Air Cooled

Dimensional drawings and specifications for RD1600-2000 AIR COOLED models.

4.40 Wiring Diagram—RD (500/700/850-1000-1200-1600-2000-2400-3000-3800-5000-6000)-460-3-60-A, 400-3-50-A

Wiring diagram for various RD models across different voltages and frequencies.

Related product manuals