Sullair RN-0175-230-1-60-A User Manual

Failure to follow the instructions
and procedures in this manual or,
misuse of this equipment will
VOID its warranty!
WARRANTY NOTICE
USER/SERVICE MANUAL
REFRIGERATED DRYERS
RH—HIGH TEMPERATURE
RN—NON-CYCLING
RD—DIGITAL CYCLING
PART NUMBER:
KEEP FOR
FUTURE
REFERENCE
©
SULLAIR CORPORATION
02250195-401 R00
The information in this manual is current
as of its publication date, and applies to
compressor serial number:
(RH) 0611SA0198
(RN) 4810SA0001
(RD) 0711SA0263
and all subsequent serial numbers.

Sullair RN-0175-230-1-60-A Specifications

General

Brand	Sullair
Model	RN-0175-230-1-60-A
Category	Dryer
Language	English

Summary

SECTION 1 SAFETY

SAFETY INFORMATION

Essential guidelines for safe operation, maintenance, and handling of the dryer.

SECTION 2 RH SERIES REFRIGERATED HIGH TEMPERATURE COMPRESSED AIR DRYER

SPECIFICATIONS

Details minimum and maximum operating conditions for the dryer.

TYPICAL INSTALLATION DIAGRAM

SAFETY REGULATIONS AND PROCEDURES

Covers important safety notes, transportation, positioning, installation, and pre-operation steps.

REFRIGERANT DRYER FEATURES

DRYER OPERATION PROCEDURE

Step-by-step instructions for starting and shutting down the dryer.

P&I SCHEMATICS

Illustrates the process and instrumentation flow for RH15-75 and RH100.

WIRING DIAGRAM

Electrical schematic showing component connections and layout.

TROUBLESHOOTING GUIDE

Identifies common problems, causes, repairs, and comments for troubleshooting.

COMPONENT SETTINGS

Details settings for various switches, timers, and temperature controls.

SECTION 3 RN & RD SERIES REFRIGERATED NON-CYCLING COMPRESSED AIR DRYER

INTRODUCTION AND SPECIFICATIONS

Overview of RN & RD series features, benefits, and operating conditions.

SAFETY INSTRUCTIONS AND HANDLING

Covers safety regulations, issues to avoid, receiving, inspection, and transportation.

INSTALLATION AND PRODUCT FEATURES

OPERATIONAL PRINCIPLES

Explains the refrigerant and compressed air circuits and heat exchanger function.

INSTALLATION AND OPERATING REQUIREMENTS

Specifies pipe, electrical, precautions, installation, and operational procedures.

P&I SCHEMATICS (RN Series)

Process and Instrumentation diagrams for RN5-10-15-25, RN250-400, RN35-75, RN100-200.

P&I SCHEMATICS (RD Series)

Process and Instrumentation diagrams for RD400-500-700-850 and RD700-850 models.

P&I SCHEMATICS (RD Large Capacity)

Process and Instrumentation diagrams for RD1000-6000 models.

WIRING DIAGRAMS (RN Series)

Electrical schematics for various RN series models.

MAINTENANCE PROCEDURES

Outlines recommended maintenance activities by week, month, and year.

TROUBLESHOOTING COMMON ISSUES

Identifies common problems, causes, repairs, and comments for troubleshooting.

MODEL SETTINGS AND SPECIFICATIONS TABLES

Details settings, pressure, temperature, and flow rates for various models.

SECTION 4 E-680 CONTROLLER FOR REFRIGERANT DRYERS

CONTROLLER DESCRIPTION AND FEATURES

Describes the E-680 controller's capabilities, inputs, outputs, and panel layout.

CONTROLLER OPERATION AND INTERFACE

Explains normal operation, screen displays, and button functions.

EXTERNAL CONNECTIONS AND TERMINALS

NORMAL OPERATION MODES

Describes the controller's display during normal operation and status indication.

CONFIGURATION MODE AND PARAMETERS

Guides through entering configuration mode and adjusting parameters.

P&I DIAGRAMS (RD Series)

WIRING DIAGRAMS (RD Series)

Electrical schematics for RD series models with various voltage/phase configurations.