Page 3 of 34
RECOMMENDED ROUTINE MAINTENANCE
Daily
1. Open kaddis drains on lower manifold and valve housings to discharge any entrained
condensate.
2. Ensure ’power on’ light is illuminated (SHR versions only).
Monthly
As above and include:
1. Ensure cam timer motor rotates to specification.
2. Ensure all manifold, valve housing and end plate gaskets do not leak.
3. Check all control valves, pipe and fittings (within instrumentation shroud) for air leaks.
4. Check interface operation - green pneumatic indicator will show during operation.
To Next Page
Loading...
