1
Code: 02250151-- 218 SR-- 5 --- S R -- 100
English
Index
1Introduction page2
1.1 Foreword page 2
1.2 Packaging page 2
1.3 Transport page 2
1.4 Stora ge page 2
1.5 Inspection page 2
2 Installation page 2
2.1 Dryer installation page 2
2.2 Electrical connection page 3
2.3 Condensate drian page 3
3 Start---up and operation page 3
3.1 Preliminary checks page 3
3.2 Starting the dryer page 3
3.3 Stopping the dryer page 4
3.4 Operation page 4
4 Maintenance page 4
4.1 Preventive maintenance page 4
4.2 Disassembling the unit page 5
4.3 Refrigerant leaks in the refrigeration circuit page 5
4.4 Refrigerant charging page 5
5Calibration page5
6 Spare parts list page 5
7 Troubleshooting page 6
Safety warnings
Important:
S Keep this manual with the machine throughout its entire service life.
S Carefully read this manual before carrying out any operation on the machine.
S This machine is designed for PROFESSIONAL USE only. Only u s e the m a-
chine for the purpose for which it is intended. Improper use of the m achine
absolves the manufacturer from all liability.
This manual has been compiled to help the final user perform just those opera-
tions which do not require removal of the panels.
All other operations which involve the removal of covers from instruments or
electrical circuit--- breakers using special tools must only be carried out by
trained personnel due to the danger of rotating parts or live components.
Tampering with, or substitution of, any compone nt by unaut horized personnel
invalidates the warranty.
Each machine is equipped with an electric disconnect device which allows the op-
erator to work on the machine in absolute safety. This device must always be used
to disconnect the mains supply t o avoid any risk of danger during maint enance
work (e lectric s hocks, scalding, automatic start --- up, moving parts and remote
control).
Before servicing the dryer always make sure the compressed air circuit is depres-
surised.
When requesting technical assistance or ordering spare parts, always quote the
model and serial number on the identification plate mounted externally on the
unit.
IMPOR TANT: data contained in this publication is to be considered as indicative
only. The manufacturer reserves the right to modify data without prior notice.
To Next Page
Loading...
