Sullair SRC - Page 26

SRC Service Manual
Revision 02
Aug 2007
4.3.4.2 Buttons
Alarm Reset / Up
o Standard Function: Resets Alarm or Warning.
o In Alarm Menu: Scrolls up to previous alarm or item.
o In Parameter Menu: Scrolls up to previous parameter or increases a
value (when modifying a parameter).
Alarm Report / Down
o Standard Function: Displays recorded alarms & warnings.
o In Alarm Menu: Scrolls down to next alarm or item.
o In Parameter Menu: Scrolls down to previous parameter or decreases a
value (when modifying a parameter).
Drain / Exit
o Standard Function: Manually operates the drain valve according to
timed mode settings. (See Section 8.5)
o In Alarm Menu: Exits the current alarm, item or menu.
o In Parameter Menu: Exits the current parameter or menu.
On/Off / Enter
o Standard Function: Turns the dryer on and off.
o In Alarm Menu: Enters the current alarm or item.
o In Parameter Menu: Enters the current parameter or saves changes to
its value (when modifying a parameter).
Page 25 of 56