SRC Service Manual
Revision 02
Aug 2007
There are 3 additional parameters as follows:
1) C4 - Immediate Compressor Off Temperature: The temperature at which the compressor is
turned off immediately, even in the Compressor Off Time Delay (C3) has not passed. (Default
0.5
o
C)
2) C5 – Software Identifier: The software installed on the dryer (designates cycling software).
3) C6 – Compressor ON Time Delay: This is the minimum time between consecutive starts.
(Default: 60 seconds)
Page 34 of 56
To Next Page
Loading...
