Sullair VS16 50HP Series - Section 1: Safety Precautions; Section 2: System Description; Section 3: Specifications

TABLE OF CONTENTS
Section 1 PAGE
SAFETY 1 1.1 GENERAL
1 1.2 PERSONAL PROTECTIVE EQUIPMENT
1 1.3 PRESSURE RELEASE
1 1.4 FIRE AND EXPLOSION
2 1.5 MOVING PARTS
2 1.6 HOT SURFACES, SHARP EDGES AND SHARP CORNERS
2 1.7 TOXIC AND IRRITATING SUBSTANCES
2 1.8 ELECTRICAL SHOCK
3 1.9 LIFTING
3 1.10 ENTRAPMENT
Section 2
DESCRIPTION
5 2.1 INTRODUCTION
5 2.2 DESCRIPTION OF COMPONENTS
5 2.3 ROTARY SCREW VACUUM SYSTEM, FUNCTIONAL
DESCRIPTION
5 2.4 COOLING AND LUBRICATION SYSTEM, FUNCTIONAL
DESCRIPTION
13 2.5 DISCHARGE SYSTEM, FUNCTIONAL DESCRIPTION
13 2.6 CONTROL SYSTEM, FUNCTIONAL DESCRIPTION
14 2.7 INLET SYSTEM, FUNCTIONAL DESCRIPTION
15 2.8 INSTRUMENTATION, FUNCTIONAL DESCRIPTION
Section 3
SPECIFICATIONS
17 3.1 SPECIFICATIONS - VS-16 30-50HP / 22-37KW
19 3.2 LUBRICATION GUIDE AND APPLICATION GUIDE
20 Figure 3-2A Identification - VS-16 30-40HP/ 22-30KW Air-cooled
21 Figure 3-2B Identification - VS-16 30-40HP/ 22-30KW
Water-cooled
22 Figure 3-2C Identification - VS-16 50HP/ 37KW Air-cooled
23 Figure 3-2D Identification - VS-16 50HP/ 37KW Water-cooled
24 Figure 3-3A Piping and Instrumentation - 30-40HP/ 22-30KW
Air-cooled
Continued on next page
OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL